7) When using complex remote control commands, such as forward jumping, please make sure that there
are no obstacles (especially people) within a half-circle with a diameter of 2 meters in front of the robot dog.
If any casualties or property damage occur due to non-standard operations, Yushu Technology will not be
responsible for any resulting losses and consequences!
8) Switching standard instructions: When switching control modes, please ensure that the robot dog is in
a prone or damping mode and that there are no people within a 1-meter diameter range. After successfully
switching control modes, the robot dog will automatically stand up. If any casualties or property damage occur
due to non-standard operations, Unitree Robotics will not be responsible for any resulting losses and
consequences!
9) Safety reminder for restoring standing position: Restoring standing position requires space for the
robot dog to flip over. Please ensure that there are no people or objects within a 2-meter diameter circle around
the robot dog to avoid unnecessary casualties and property damage. Otherwise, Unitree Robotics will not be
responsible for any resulting losses and consequences.
10) When the battery power is only one block left, please stop and turn off the robot dog in time, take out
the battery to charge to avoid the damage of falling when the battery is low.
To Next Page
Loading...
