services, it means that the customer allows Unitree Robotics to access, collect and process information related
to faults, detection, positioning and debugging when providing services. Unitree Robotics will access and
process relevant information in accordance with the customers' request under the premise of the customers'
consent, and the information will only be used to provide maintenance services. Since the users are the
controller of such information, Unitree Robotics cannot confirm whether such information contains customers’
confidential information or personal data, and the customers shall guarantee that it will obtain or retain all
necessary consents, licenses, authorizations ("Agree") is used to allow Unitree Robotics to provide this service,
so that Unitree Robotics will not violate applicable legal requirements, the customers' privacy policy, or the
agreement between the customer and the user when providing related services. Unitree will take reasonable
measures to ensure the security of such users information, but Unitree Robotics is not responsible for direct or
indirect responsibility for the act of obtaining and processing such information in the process of providing
services.
B2 is a four-legged robot designed for industrial applications, featuring all-weather operation, strong load
and expansion space, multi-dimensional perception, full-scene coverage, powerful computing power, and
precise insight. It can provide you with a more efficient and intelligent solution.
1) This product is not a toy and is not intended for use by persons under the age of 18. Keep out of reach
of children and be careful when operating in the presence of children.
2) You are obliged to be aware of the laws in your area and to comply with relevant laws and regulations.
3) This chapter is an introductory chapter for new users to manipulate robots. New users can quickly
master how to use the Remote Control to control the robot to show excellent movement performance by
reading this section. This chapter is also a chapter that old users often need to refer to. Old users can read this
chapter repeatedly to grasp the essentials of operating the robot, and then they can draw inferences from case,
and know what kind of movements are not recommended.
4) When the users run the program developed by themselves in the developer mode: The remote control
commands are still valid when the high-level (application layer) is developed. At this time, if the high-level
API commands and the remote control commands are sent to the robot, both commands will be executed by
the robot. It may cause the robot to become unstable. Please be sure to judge whether the users need to use the
remote control according to the running state of the robot. Remote control commands fail during low-level
development.
5) When using, please control the robot within sight, keep a certain safe distance from the robot, and do
not touch the robot with your hands after the robot is powered on.
6) After B2 is turned on, it defaults to AI control mode and automatically stands up. Please keep a safe
distance from the quadruped robot!
To Next Page
Loading...
