Universal Robots CB Series Manual

NOTICE
Keep the ESD-sensitive part in its original shipping container (a special "ESD bag")
until the part is ready to be installed.
NOTICE
Put the ESD wristband on your wrist. Connect the wristband to the system ground
point.
It discharges any static electricity in your body to ground.
NOTICE
Replacing an ESD-sensitive part in a safe way is important to avoid damage to the
part. It is important to take precautions when handling an ESD-sensitive part.
NOTICE
Hold the ESD-sensitive part by its edges. Do not touch its pins or hold directly on
any exposed prints.
Service Manual 5 e-Series
2.Handling ESD-Sensitive Parts
Copyright © 2009–2024 by UniversalRobotsA/S. All rights reserved.

Universal Robots CB Series Specifications

General

Brand	Universal Robots
Model	CB Series
Category	Robotics
Language	English