EU Declaration of Incorporation (DOI) (in accordance with 2006/42/EC Annex II B) original: EN
Manufacturer:
Universal Robots A/S
Energivej 25, DK-5260 Odense S Denmark
Person in the Community
Authorized to Compile the
Technical File:
David Brandt, Technology Officer, R&D
Universal Robots A/S,
Energivej 25, DK-5260 Odense S
Description and Identification of the Partly-Completed Machine(s):
Product and Function:
Industrial robot multi-purpose multi-axis manipulator with an OEM
control box & with or without a 3PE teach pendant. Function is
determined by the completed machine (robot application or cell with
end-effector, intended use and application program).
Model and Serial Number
UR20 & UR30: Below cited standards and this declaration include:
Starting 2023 6 8 00000 and higher
year
series
8=UR20, 9=UR30
Sequential numbering, restarting at 0 each year
Incorporation
Universal Robots UR20 & UR30 with an OEM control box shall only
be put into service upon being integrated into a final complete
machine (robot application or robot cell), which conforms with the
provisions of the Machinery Directive and other applicable Directives.
It is declared the above products fulfill, for what is supplied, the following Directives as detailed
below. When this incomplete machine is integrated and becomes a complete machine, the
integrator is responsible for determining that completed machine fulfill all applicable Directives
and providing the Declaration of Conformity.
I. Machinery Directive
2006/42/EC
The following essential requirements have been fulfilled:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.4.3, 1.2.5, 1.2.6, 1.3.2, 1.3.4, 1.3.8.1, 1.3.9, 1.5.1,
1.5.2, 1.5.5, 1.5.6, 1.5.10, 1.6.3, 1.7.2, 1.7.4, 4.1.2.3, 4.1.3, Annex VI. It is declared
the relevant technical documentation has been compiled in accordance with Part B
of Annex VII of the MD.
II. Low-voltage Directive
2014/35/EU
Reference the LVD & harmonized standards used below.
III. EMC Directive
2014/30/EU
Reference the EMC Directive & harmonized standards used below.
Reference to the harmonized standards used, as referred to in Article 7(2) of the MD & LV
Directives and Article 6 of the EMC Directive:
(I) EN ISO 13732-1:2008 as applicable, (I) (II) EN 60204-1:2018
as applicable (II) EN 60664-1:2007, (II) EN 61140:2002/ A1:2006
Reference to other technical standards and technical specifications used:
(I) ISO 9409-1:2004, (II) EN 60320-1:2021, (II) EN 61784-3:2010 [SIL2]
The manufacturer, or authorized representative, shall transmit relevant information about the
partly completed machinery in response to a reasoned request by the national authorities.
Approval of full quality assurance system (ISO 9001), by the notified body Bureau Veritas,
certificate #DK015892.
OEM Control Box Installation Guide
Copyright © 2019–2024 by UniversalRobotsA/S. All rights reserved.
To Next Page
Loading...
Need help?
General
