Unox MINDMaps CHEFTOP User Manual

CEILING/BOTTOM
PROBE OFFSET
Offset of the ceiling temperature probe
(expressed in Celsius degrees and
multiply by 10)
from -50 to +50 0
CEILING
CHAMBER
PROBE OFFSET
Offset of the ceiling temperature probe
(expressed in Celsius degrees and
multiply by 10)
From -50 to 50
0
CHAMBER PROBE
OFFSET
Degrees celcius offset of chamber
probe (each 0.1 °C corresponds to 1 unit
in the parameter)
From -50 to 50
0
CONSUMABLE PRICES
It allows to set an unitary value of
the following quantity:
■ ENERGY PRICE
■ GAS PRICE
■ WATER PRICE
■ DETERGENT PRICE
In this way the oven in the
consumption data section will show
you the cost of the programs run.
- -
CONSUMPTION DATA IN
CURRENCY
It allows to translate the quantity of
the consumption data in cost
OFF/ON OFF
CORE PROBE OFFSET
Degrees celcius offset of resistor probe
(each 0.1 °C corresponds to 1 unit in the
parameter)
From -50 to 50
0
CHAMBER PROBE
OFFSET
Celsius degrees offset of chamber
probe (each 0.1 °C corresponds to 1 unit
in the parameter)
From -50 to 50
0
COMBUSTION HEAT
UNIT OF MEASURE
Allow to select the unit of
measurement of the heating value
kWh/smc – Mj/
smc – BTU/scf
kWh/
smc
COOKING
BEFORE
WASHING
Number of Pollo cooking programs
you can run before a washing program
is required (if this parameter is activate
you can choose between medium or
long washing cycle only)
from 1 to 99
7
CORE PROBE
If it is OFF the core probe is deactivated.
If it is MONO (standard value for ONE
ovens) the oven expects to have a single
point core probe.
If it is MULTI (standard value for PLUS
ovens) the oven expects to have a multi
point core probe.
Only for PLUS ovens it is possible to
use a multi or mono point core probe
indistinctly.
Off /Mono /
MuLt I
Mono (for on E
ovens)/MuLt I ( for
PLuS ovens)
60

Unox MINDMaps CHEFTOP Specifications

General

Brand	Unox
Model	MINDMaps CHEFTOP
Category	Commercial Food Equipment
Language	English