Push-to-close door with Switch
The Door handle and door microswitch are merged
into one component with the new
MIND.Maps™.
The latch incorporates the switch and the door pin
has a stainless steel central shaft.
The central pin has been designed in stainless steel
to ensure minimum friction and maximum
strength.
Safety thermostat
The new MIND.Maps™ has a new design and new
safety thermostat as the oven can reach up to 300°
C (572°F). The safety thermostat has a trigger
limit of 350 °C (662°F).
The new safety thermostat accurately reads the
temperature thanks to its design. The pin is held
by a bracket so that the thermostat is not in
contact with the cavity. This guarantees a perfect
temper
ature reading.
Centrifugal Fan
A motor is positioned in the bottom right corner of
the oven to cool down the external parts of the
oven.
The cold air circulates in-between the external
case and the cooking chamber.
It only activates when the oven reaches over 180°C
(356°F).