EasyManua.ls Logo

Upright X33RT - Pre-start Inspection; Work Place Inspection and Practices

Upright X33RT
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Daily Maintenance
SR3370 & SR2770 (CE) – 12864B page 9
Maintenance Information
Pre-operational inspection
(Set the KEY SWITCH to off before starting this inspection).
COMPONENTS SERVICE REQUIRED
Fuel level Visually inspect
Water separator (diesel engines only) Visually inspect (condition)
Fuel leaks Visually inspect (hoses, connections, etc)
Engine Oil Check oil level (between dipstick lines)
Engine coolant Check fluid level and radiator hoses
Radiator cap Visually inspect (installation)
Platform entrance gate Visually inspect (installation, operation)
Wiring harness and connectors Visually inspect (installation, condition)
Battery terminals Visually inspect (installation)
Hydraulic oil reservoir cap Visually inspect (installation)
Hydraulic oil level Check fluid level (at line on side of tank)
Hydraulic oil leaks Visually inspect (hoses, tubes)
Tires and wheels
Visually inspect (condition)
Bolts and fasteners
Visually inspect (looseness)
Structural damage & welds Visually inspect (weld cracks, dents)
Platform guardrails Visually inspect (condition)
Lanyard anchor points Visually inspect (condition)
Bubble level indicator Visually inspect (condition)
Guides, rollers and slides Visually inspect (condition)
START THE ENGINE FROM THE BASE CONTROL PANEL TO CHECK THE FOLLOWING
Charging system Check condition (gauge)
Level sensor Check operation
Control switches and alarms Actuate and inspect (operation)
Emergency lowering Check operation (causes correct motion)
Air Filter Check condition (gauge)
Safety prop Check operation
Parking brakes Check operation
Placards, decals and Operator’s Manual Visually inspect (installation, condition)
Optional items Check operation
Hydraulic Hose Age
EN982 Clause 7.3.1 requires the manufacturing date of each hydraulic hose to be clearly visible on the
hose.
Hoses used in production of this unit are manufactured by Hydraulink and the manufacturing date is
present in a coded format.
The key to decode the date is as follows:
2
2-2005 lot 050519/10
Month of Manufacture
Sample Hose Code
Year of Manufacture
Lot number
lot 050519/102005
-

Table of Contents

Other manuals for Upright X33RT

Related product manuals