DS1098-028A 78
2.8.1.3 Schedule
This function makes it possible to program face and vehicle detection for each individual channel.
If you want to use the same program for other channels, use the Copy function. Use the Default function to restore the
initial configurations. Click on Save to save the settings.
RECOGNITION
2.8.2.1 Model Configuration
This section describes the features of the devices which are performing the intelligent analysis and can be used to enable
• Device/Channel: This indicates the device/camera whose information is being displayed.
• Face Recognition Model: This indicates the Face Recognition model implemented on the device.
• FD Model: This indicates the Face Detection model implemented on the device.
• Enable Face Recognition: This can be used to enable Face Recognition on the device.
To Next Page
Loading...
Need help?
General
