DS1098-028A 85
2.8.3.2 Human & Vehicle Detection
Click on Alarm to define the parameters for the alarms for human recognition and vehicle detection:
•
Channel: Select the channel you want to configure
•
Buzzer: This can be used to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when
the detection is triggered.
•
Alarm Out: This can be used to set to emit an alarm tone to the device if the NVR supports a connection to an
external alarm device.
To Next Page
Loading...
Need help?
General
