A.10 Addendum
Manual Page Number Revision
58-59 Maintenance, Electrical System: Add the following.
Inspection, Current Electrical Assemblies
Safety Switches: Check the sensors, actuators and cords for damage.
Switches should be replaced if they are damaged or worn. The sensor and
actuator must align within 1/16" (1.6 mm) to close the safety circuit.
Amplier:
brush and instruction sheet (the part number for the kit is 12920). Apply the
Urschel to receive a replacement.
66 Parts, Maintenance Videotapes: videotapes are no longer available.
Maintenance videos are now supplied on DVD. Order part number 401003.
68-69 Parts, Tools:
11045 - Grease, Cartridge, Haynes
®
Lubri-Film is replaced by:
98280 - Grease 0, Urschelube FDA, cartridge.
Items 3, 5, 6, and 7 Allen Wrenches and items 10, 13, and 15 wrenches are
no longer supplied. The following tools are supplied with the machine.
11010 - Wrench, combination, 9/16", chrome plated
98130 - Wrench, combination, 1/2", chrome plated
98131 - Wrench, combination, 7/16", chrome plated
98136 - Wrench, 8 piece set, chrome plated, T-handle
98137 - Wrench, 13 piece set, chrome plated, ball end
13779 - T-Handle, s.s.
98163
17453
Optional Parts
17567
17497
17498
17566
To Next Page
Loading...