3
FOREWORD ..............................6
SAFETY
RULES FOR SAFE OPERATION ...................9
SAFETY SIGNS ..............................10
PROTECTIVE DEVICES ........................12
OPERATION
GENERAL INFORMATION .......................14
Specifications, Product Limitations, Noise Emission ......14
Applications, Operating Principle ..................15
Sizes of Cuts, Measuring Crinkle Cuts, Types of Cuts .....16
Machine Shipment, Pre-Installation Plan, Location .......18
Lifting the Machine ...........................19
INSTALLATION ..............................20
Electrical Power .............................20
SAFETY SWITCHES ...........................22
Amplifier, Safety Switch Test .....................22
START-UP AND STOPPING ......................24
Pre-start Checklist, Start-up Procedure
& Stopping Procedure........................24
FEEDING PRODUCT ..........................25
Feeding Method .............................25
MOTOR OVERLOAD OR JAM ....................26
Motor Overload, Correcting Machine Overload or Jam ....26
MAINTENANCE
CLEANING .................................28
Importance of Daily Cleaning, Cleaning Agents
& Daily Cleaning Procedures ...................28
LUBRICATION ...............................29
Recommended Lubricant, Lubrication Points, Lubrication
Schedule, Gear Lubrication, & Motor Lubrication.......29
(continued)
contents
To Next Page
Loading...