LIFTING THE MACHINE
CAUTION: Always use the frame to lift
or move the machine, never the starter en-
closure, motor, covers or guards. Do not
crush electrical cords beneath frame when
lifting machine!
Both sides of machine frame should rest on
lifting forks. Remove the discharge chute if lift-
ing forks are not long enough and lift machine
from the discharge side (Figure 16).
WARNING: Knives may be exposed
when discharge chute is removed. Contact
with exposed parts may cause injury.
OPERATION
General Information
19
1
Figure 16 — Always use frame to lift or move machine.
(1) Lifting Forks.
To Next Page
Loading...