USCutter SC2 - Test Cut Adjustments; Cut Speed Adjustment; Force;Pressure Adjustment

www.uscutter.com
425.481.3555
23
3
4
CUT SPEED
This setting determines how fast the design is
cut out and is usually measured in miliimeters
per second.
small intricate
designs
DECREASE
CUT SPEED
large simpler
designs
INCREASE
CUT SPEED
FORCE/PRESSURE
This setting determines how hard the blade comes down onto the material.
outer square
won’t weed
INCREASE
FORCE
blade digging too
far into carrier
DECREASE
FORCE
weeds easily with a
lightly scored carrier
PERFECT!
Test Cut