6
Before you begin:
Read the assembly instructions from beginning to end. Give yourself plenty of
time. Gather the tools you’ll need that aren’t inluded in the box:
1. A Phillips head screwdriver.
Here’s how to assemble the stand:
Step 1.
Attach the feet (A) to the legs (F).
This is the foot:
This is the leg:
Attach the foot to the leg with four #1 screws.
Notice there are more than four holes on the foot.
Line up the foot and the leg so that the four holes in the leg that look like this line up with
the four holes on the foot.
Assembling the stand
#1 #2 #3
To Next Page
Loading...
Need help?
General
