Need help?Do you have a question about the USR IOT USR-TCP232-T2 and is the answer not in the manual?
General| Model | USR-TCP232-T2 |
|---|---|
| Category | Control Unit |
| Type | Serial to Ethernet Converter |
| Communication Interface | RS232, Ethernet |
| RS232 Port | 1 |
| Power Supply | DC 5V |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 2 |
| Network Interface | RJ45 |
| Ethernet Port | 10/100Base-T |
| Power Input | 5V |
| Protocol | TCP/IP, UDP |
| Parity | None, Even, Odd |
| Flow Control | RTS/CTS |
| Basic Function | Bi-directional transparent transmission between RS232 and Ethernet |
Sets up the hardware for testing the module's conversion function.
Details the factory default settings for the module's parameters.
Guides through performing a basic send/receive data test for network communication.
Lists the key functionalities and capabilities of the USR-TCP232-T2 module.
Summarizes the fundamental hardware and software specifications of the module.
Details the function and definition of each pin on the module interface.
Presents typical application connection diagrams and power/UART interfaces.
Explains core network operations like IP addressing and web server functionality.
Describes various socket modes like TCP Client/Server and UDP Client/Server.
Explains how to create a virtual COM port for remote control via TCP/IP.
Details serial port parameters, framing, and RFC2217 functionality.
Introduces advanced features like heartbeat, registration packages, and USR-cloud.
Covers setting network parameters using the software, including device search.
Guides on configuring module parameters through its built-in webpage interface.
Provides an overview of AT commands for module control and configuration via UART.
To Next Page