USR IOT USR-TCP232-T2 User Manual

USR-TCP232-T2 user manual www.usriot.com
Jinan USR IOT Technology Limited www.usriot.com
55
Parameters: ON: enable the echo, echo the command entered by the AT command.
OFF: under AT command mode, the entered command do not echo.
E.g.: AT+E=on
5.3.4.2. AT+Z
Function: restart module
Format: setting:
AT+Z<CR>
<CR><LF>+OK<CR><LF>
Parameters: none
<note>: after perform this command correctly, module restart and exit the AT command mode.
5.3.4.3. AT+VER
Function: query module firmware version.
Format: query:
AT+VER<CR>
<CR><LF>+OK=< ver ><CR><LF>
Parameters: ver: query module firmware version.
5.3.4.4. AT+ENTM
Function: exit the AT command mode and enter the transparent transmission:
Format: setting:
AT+ENTM<CR>
<CR><LF>+OK<CR><LF>
Parameters: none
<note>: after perform this command correctly, module change into command mode from transparent transmission
mode.
5.3.4.5. AT+RELD
Function: module reset
Format: setting
AT+RELD<CR>
<CR><LF>+OK<CR><LF>
Parameters: none.
5.3.4.6. AT+MAC
Function: query module MAC
Format: query:
AT+MAC<CR>
<CR><LF>+OK=< MAC ><CR><LF>
Parameters: mac: MAC address of the module( e.g.00020K2050A )

USR IOT USR-TCP232-T2 Specifications

General

Brand	USR IOT
Model	USR-TCP232-T2
Category	Control Unit
Language	English