xviii
About the Operation Guide
This Operation Guide has the following chapters:
Chapter 1 - Machine Parts
This chapter explains the names of parts.
Chapter 2 Handling Paper
Explains how choose, handle and load paper.
Chapter 3 - Printing Operation
This chapter explains how to print from your workstation.
Chapter 4 - Maintenance
This chapter explains how to replace the toner container and how to care
for your printer.
Chapter 5 - Troubleshooting
This chapter explains how to handle printer problems that may occur,
such as paper jams.
Chapter 6 Using the Operation Panel
Explains how to use the operation panel to configure the printer.
Chapter 7 Options
Shows the available options.
Chapter 8 Computer Interface
Describes the possible connections between the printer and your
computer.
Chapter 9 - Specifications
This chapter lists the printer’s specifications.
Glossary
A Glossary of terms used is provided here.
Conventions
This manual uses the following conventions.
Convention Description Example
Italic Typeface
Used to emphasize a key word,
phrase or reference to additional
information.
To replace the toner container, refer to Toner
Container Replacement on page 4-2.
Bold
Used to denote buttons on the
software.
To start printing, click OK.
Braket Bold
Used to denote operation panel
keys.
Press [GO] to resume printing.
Note
Used to provide additional or useful
information about a function or
feature.
Note Check with your network
administrator for the network address
settings.
Important
Used to provide important
information.
IMPORTANT Ensure paper is not folded,
curled, or damaged.
To Next Page
Loading...
Need help?
General
