Utax CLP 3521

3-10 Printing Operation
Printing a Network Interface Status Page
You can print out a status page for the network interface. The network
status page shows the network addresses, and other information under
various network protocols about the network interface.
Adjust/Maintenance
Adjust/Maintenance is used to adjust the print quality and to carry out
printer maintenance.
The options available in Adjust/Maintenance are as follows:
• Color Calibration
• Registration Normal
• Registration Details
• Restart Printer
• Service
IMPORTANT Service is primarily a menu used by service
personnel for maintenance work. There is no need for customers to
use this menu.
1 Press [MENU].
2 Press U or V repeatedly until Adjust/Maintenance > appears.
3 Press Z while Adjust/Maintenance > is displayed.
4 Press U or V repeatedly until >Service > appears.
5 Press Z.
6 Press U or V repeatedly until >>Print Network Status Page
appears.
7 Press [OK]. A question mark (?) appears.
8 Press [OK]. Processing appears and a status page is printed out.
9 When printing ends, the display returns to Ready.
Adjust/ >
Maintenance
>>Print Network
Status Page ?