3-6 Printing Operation
Set the Security Level to High.
NetWare
This section explains the procedure for enabling NetWare.
1 Enter the administrator ID and password. Then, if NetWare is set to
Off, use U or V to select On and press [OK].
2 Press Z.
3 Press [OK]. A blinking question mark (?) appears. Each time you
press U or V, the selection changes.
4 Display the item you want to set and press [OK].
5 Press [MENU]. The display returns to Ready.
>Security Level
High
>NetWare >
On
>>Frame Type
Auto
>>Frame Type
?802.3
>>Frame Type
?Ethernet-II
>>Frame Type
?SNAP
>>Frame Type
?802.2
>>Frame Type
?Auto
To Next Page
Loading...
