EasyManuals Logo

Utax P-3020 MFP User Manual

Utax P-3020 MFP
481 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #246 background imageLoading...
Page #246 background image
8-40
Default Setting (System Menu)
6 Press the OK key. Sleep Timer appears.
7 Press the  or  key to set the Sleep Timer. Set the
amount of time before entering the sleep state in
minutes. You cannot use the numeric keys to enter this
value.
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE: Refer to page 8-45 for the default settings.
• Auto Panel Reset ON/OFF
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting. The default setting is On.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Timer Setting], and press
the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Utax P-3020 MFP and is the answer not in the manual?

Utax P-3020 MFP Specifications

General IconGeneral
BrandUtax
ModelP-3020 MFP
CategoryAll in One Printer
LanguageEnglish

Related product manuals