Utax P-3020 MFP User Manual

8
8-41
Default Setting (System Menu)
4 The Timer Settings menu appears.
5 Press the  or  key to select [Auto Panel Reset].
6 Press the OK key. Auto Panel Reset appears.
7 Press the  or  key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Timer Settings menu.
Panel Reset Timer
If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are between
5 and 495 seconds (every five seconds). The default setting is 90 seconds.
NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear.
Use the procedure below to set the reset time.
1 In the Sys. Menu/Count. menu, press the  or  key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the  or  key to select [Timer Setting], and press
the OK key.
Timer Setting: a b
*********************
2 PanelReset Timer
3 Low Power Timer
[ Exit ]
1 Auto Panel Reset
Auto Panel Reset: a b
1 Off
*********************
2 *On
Sys. Menu/Count.: a b
3 System/Network
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language

Utax P-3020 MFP Specifications

General

Brand	Utax
Model	P-3020 MFP
Category	All in One Printer
Language	English