Utax P-3020 MFP

11
11-3
Management
Use the procedure below to enable user login administration.
NOTE: Refer to Character Entry Method on Appendix-5 for details on entering characters.
1 Press the System Menu/Counter key on the main unit
operation panel.
2 Press the  or  key to select [User/Job Account].
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
3 The User/Job Account menu appears.
4 Press the  or  key to select [User Login Set.].
5 Press the OK key. The User Login Set. menu appears.
6 Press the  or  key to select [User Login].
7 Press the OK key. User Login appears.
Sys. Menu/Count.: a b
*********************
5 User Property
6 Common Settings
[ Exit ]
4 User/Job Account
Login User Name: L b
*******************
Login Password:
[ Login ]
User/Job Account: a b
*********************
2 Job Account. Set.
3 Unknown ID Job
[ Exit ]
1 User Login Set.
User Login Set.: a b
*********************
2 Local User List
3 Group Auth.
[ Exit ]
1 User Login
User Login: a b
*********************
2 Local Authentic.
3 Netwk Authentic.
1 *Off