11-4
Management
8 Press the ļ² or ļ³ key to select [Local Authentic.] or
[Netwk Authentic.], and then press the OK key.
Select [Off] to disable user login administration.
When "Network Authentication" is selected, select
[NTLM], [Kerberos], or [Ext.] for the server type and
press the OK key.
If [NTLM] or [Kerberos] is selected for the server type,
enter the host name (up to 64 characters) and domain
name (up to 256 characters) of the authentication server,
and press the OK key. If [Ext.] is selected for the server
type, enter the host name (up to 64 characters) and port
number of the authentication server, and press the OK
key.
NOTE: If the login user name and password are rejected,
check the following settings.
ā¢ Network Authentication setting of the machine
ā¢ User property of the Authentication Server
ā¢ Date and time setting of the machine and the
Authentication Server
If you cannot login because of the setting of the machine,
login with any administrator registered in the local user list
and correct the settings. If the server type is [Kerberos], only
domain names entered in uppercase will be recognized.
Completed. is displayed and the screen returns to the
User Login Set. menu.
To Next Page
Loading...
Need help?
General
