Utax P-4030D - Eject;Feedshift Section

2LV/2L1/2L2/2MS/2MT
2-1-11
2-1-7 Eject/Feedshift section
The paper eject/feedshift section consists of the conveying path which sends the paper that has passed the
fuser section to the facedown tray, the faceup tray (60/50/45 ppm model only) or the duplex conveying sec-
tion.
Figure 2-1-19 Eject/Feedshift section
*1: 60/50/45 ppm model only
*2: Except 40 ppm (without Network) model
6
7
4
5
10
8
3
2
12
11
13
1
3
21
9
6
7
4
5
10
8
9
(60/50/45 ppm model)(40 ppm model)
1. Upper eject roller
2. Upper eject pulley
3. Actuator
(Eject full sensor (EFS)) *2
4. Lower eject roller
5. Lower eject pulley
6. Vertical guide
7. Paper exit guide
8. Top cover
9. DU feed pulley
10. Rear cover
11. Faceup roller *1
12. Faceup pulley *1
13. Feedshift guide *1