No. Description Supplement
(58) Media type attributes
1 to 28 (Not used: 18, 19, 20)
* : For details on settings,
refer to MDAT command
in “Prescribe Com-
mands Reference Man-
ual.
Weight settings Fuser settings
0: Light 0: High
1: Normal 1 1: Middle
2: Normal 2 2: Low
3: Normal 3 3: Vellum
4: Heavy 1 Duplex settings
5: Heavy 2 0: Disable
6: Heavy 3 1: Enable
7: Extra Heavy
(59) RFID information Product (OEM/maker) / destination code / a toner
name / lot number / toner capacity / toner empty infor-
mation / number of times of toner refilling
(60) Toner install mode information 0:OFF
t:ON
(61) Drum status -
(62) Drum surface potential -
(63) Drum density -
(64) LSU light volume distribution -
(65) DRT parameter coefficient -
(66) Soft version of the optional
paper feeder
Paper feeder 1/Paper feeder 2/Paper feeder 3
Paper feeder 4
(67) Version of the optional message -
(68) Altitude 0: Standard
1: High altitude 1
2: High altitude 2
(69) Charger roller correction 1 to 5
(70) Data Sanitization details result -
(71) Toner Low setting 0:Invalid
1: Effective
(72) Toner Low detection level 5 to 100(%)
(73) Number of page that swept out
at any time (SP1)
1 to 65535
(74) Number of page that swept out
at instancy (SP2)
1 to 65535
(75) The practice standard printing
rate of development TC (SGE)
0 to 15
(76) The practice standard printing
rate according to area TC
(SDR)
0 to15
To Next Page
Loading...
