Utax P-C2660 MFP

Default Setting (System Menu)
8-43
8
2 Press the OK key. The Common Settings menu
appears.
3 Press the  or  key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the  or  key to select [File Name Entry].
6 Press the OK key. File Name Entry appears. Enter
the document name (up to 32 characters).
7 Press the OK key. Additional Info appears.
8 Press the  or  key to select [None], [Date],
[JobNo.], [JobNo. + Date] or [Date + JobNo.].
9 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Subject/Body
Set the subject and body automatically entered (default subject and body) when sending the scanned originals
by E-mail.
NOTE:
• Refer to Send as E-mail on page 3-25.
• Refer to Character Entry Method on Appendix-9 for details on entering characters.
Use the procedure below to set the default e-mail subject and message body.
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
File name Entry: A b
doc 1
*
S
ABC
[ Text ]
Additional Info.: a b
*********************
2 Date
3 Job No.
1 None