Utax P-C2660 MFP User Manual

Default Setting (System Menu)
8-179
8
2 The System/Network menu appears.
3 Press the  or  key to select [Network Setting].
4 Press the OK key. The Network Setting menu
appears.
5 Press the  or  key to select [WSD-SCAN].
6 Press the OK key. The WSD-SCAN menu
appears.
7 Press the  or  key to select [On] or [Off].
8 Press the OK key. Completed. is displayed and the
screen returns to the Network Settings menu.
WSD Print Setup
Select whether or not to use WSD Print. The default setting is On.
Use the procedure below to setup the WSD-PRINT setting. The machine must be restarted after the setting is
changed.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Network Setting: a b
*********************
2 WSD-SCAN
3 WSD-PRINT
[ Exit ]
1 *TCP/IP Setting
WSD-SCAN: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network

Utax P-C2660 MFP Specifications

General

Brand	Utax
Model	P-C2660 MFP
Category	All in One Printer
Language	English