Utax P-C2660 MFP

Default Setting (System Menu)
8-181
8
Protocol Detail
Make other network related settings.
Item Description Default Setting
Restarting the
System*
NetBEUI Selects whether or not to
receive documents using
NetBEUI.
On 
SNMPv3 Set SNMPv3. Off 
FTP (Server) Select whether or not to
receive documents using
FTP.
On 
FTP (Client) Select whether or not to
send documents using FTP,
and the number of the port
to be used.
On
Port number: 21
×
SMB Select whether or not to
send documents using
SMB, and the number of the
port to be used.
On
Port number:
139

SNMP Select whether or not to
communicate using SNMP.
On 
SMTP
(E-mail TX)
Select whether or not to
send e-mail using SMTP.
Off ×
POP3
(E-mail RX)
Select whether or not to
receive e-mail using POP3.
Off ×
Raw Port Select whether or not to
communicate using Raw
Port.
On 
LPD Select whether or not to
receive documents using
LPD as the network
protocol.
On 
IPP Select whether or not to use
IPP, and the number of the
port to be used.
Off
Port number:
631

IPP over SSL Select whether or not to use
IPP over SSL.
SSL must be set to [On] in
SSL Setting on page 8-185
.
On 
HTTP Select whether or not to
communicate using HTTP.
On 