Utax P-C2660 MFP User Manual

Default Setting (System Menu)
8-200
4 Press the OK key. The Optional Network screen
appears.
5 Press the  or  key to select [Basic].
6 Press the OK key. The Basic menu screen
appears.
7 Press the  or  key to select [IPSec].
8 Press the OK key. The IPSec screen appears.
9 Press the  or  key to select [Off] or [On].
10 Press the OK key. Completed. is displayed and the
screen returns to the Basic menu.
NetWare Setup
Make this setting when you use NetWare. The default settings is "Off".
Use the procedure below to setup the NetWare setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
Optional Network: a b
*********************
[ Exit ]
1 Basic
Basic: a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit ]
1 Host Name
IPSec: a b
*********************
2 On
1 *Off
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]

Utax P-C2660 MFP Specifications

General

Brand	Utax
Model	P-C2660 MFP
Category	All in One Printer
Language	English