Utax P-C2660 MFP

Default Setting (System Menu)
8-202
AppleTalk Setup
Make this setting when you use AppleTalk. The default setting is Off.
Use the procedure below to setup the AppleTalk setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network], and press the OK
key.
2 A login screen will appear. Then, enter the user ID
and password with administrator privileges to log
in, and press [Login] (the Right Select key).
3 The System/Network menu appears.
4 Press the  or  key to select [Optional Network].
5 Press the OK key. The Optional Network screen
appears.
6 Press the  or  key to select [Basic].
7 Press the  or  key to select [AppleTalk].
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
Optional Network: a b
*********************
[ Exit ]
1 Basic
Basic: a b
*********************
2 TCP/IP Settings
3 Bonjour
[ Exit ]
1 Host Name