Utax P-C2660 MFP User Manual

Default Setting (System Menu)
8-213
8
Optional interface (Optional interface card setting)
This locks and protects the optional interface slot. The default setting is Unblock.
Use the procedure below to specify the optional interface setting.
1 In the Sys. Menu/Count. menu, press the  or 
key to select [System/Network].
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
2 The System/Network menu appears.
3 Press the  or  key to select [I/F Block Set.].
4 Press the OK key. The I/F Block Set. menu appears.
5 Press the  or  key to select [Option I/F 1] or
[Option I/F 2].
For P-C2660 MFP, select [Option I/F].
6 Press the OK key. Option I/F appears.
7 Press the  or  key to select [Unblock] or [Block].
8 Press the OK key. Completed. is displayed and the
screen returns to the System menu.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System/Network
Login User Name: L b
*******************
Login Password:
[ Login ]
System/Network: a b
*********************
2 Optional Network
3 NW InterfaceSend
[ Exit ]
1 Network Setting
I/F Block Set.: a b
*********************
2 USB Device
3 USB Storage
[ Exit ]
1 USB Host
Option I/F 1: a b
*********************
2 Block
1 *Unblock

Utax P-C2660 MFP Specifications

General

Brand	Utax
Model	P-C2660 MFP
Category	All in One Printer
Language	English