Utilitech 7115-02 - New Construction Assembly Instructions

6
Joist or
wall stud
NEW CONSTRUCTION ASSEMBLY INSTRUCTIONS
BEFORE INSTALLATION – Turn off power source.
Review all safety precautions.
1. Attach the duct connector (C) to the fan housing (A).
2. Remove the wiring box cover (2.1) from the fan
housing (A). Remove the wiring knockout (2.2) from
the wiring box cover (2.1) with a athead screwdriver
(not included).
3. Place the fan housing (A) next to a ceiling joist or
wall stud. The fan housing should be level and
perpendicular to the joist or stud.
2
3
1
A
C
2.1
7.12.2
A
A