1. INSTALLATION
1.1 Check and make sure that the following
accessories are included:
This operation manual
Scale x 1
Plastic platter x 1
Stainless steel cover x 1
Power adaptor x 1
Contact your dealer if any item missed.
FIG 1
FIG 2
1.2 Locks the plastic platter (FIG 1 A) to the
platter holder, with the screw (FIG 1 B)
included, and then apply the rubber cap
(FIG 1 C).
1.3 Place the stainless steel platter (FIG 1
D) onto the plastic platter.
To Next Page
Loading...
