10. WEIGHT UNIT INDICATOR
This indicator appears to indicate the
weighing unit being selected. Two
avoirdupois weight units are available and
this indicator means the weighing unit is
at decimal pound (e.g. 5.62 means 5.62 lb).
11. WEIGHT UNIT INDICATOR
This indicator appears to indicate the
weighing unit being selected is at
pound/ounce (e.g. 2.15.1 means 2 lb and 15.1
ounce).
4. INITIAL SETUP
4.1 PLACING THE SCALE
In order to obtain an accurate weighing result,
the scale must be placed on a strong and level
surface.
If required, adjust the adjustable feet (FIG
2 F) underneath scale to obtain a level position.
Refer to the bubble indicator for leveling
condition.
4.2 INTERNAL SETTING
4.2.1 Select Weight Unit and Display Resolution
The scale is equipped with metric and
avoirdupois weight units. Default setting =
metric weight unit only. Follow the below steps
to enable/disable the avoirdupois units.
Turn scale off
a. Press and hold TARE, then press ON/ZERO
b. Scale displays F.1
c. Press TARE twice
d. Scale displays F.3
To Next Page
Loading...
