1.4 Power on the scale
a. Before plugging the power adaptor into
electricity outlet, check and make sure
that the input voltage of power adaptor
matches with the output voltage of the
outlet. If not, do not plug in and contact
your dealer immediately.
b. Before first time use, plug the adaptor
into the wall outlet and charge the scale
for at least 8 hours.
c. After battery is fully recharged, remove
adaptor from scale. Apply the rubber cap
(FIG 2 E) to seal the DC input jack of
scale.
2. SPECIFICATIONS
Model No. Capacity
DM-3000 3000g 1g 1/3000 20g
DM-6000 6000g 2g 1/3000 40g
DM-15K 15kg 0.005kg 1/3000 0.1g
DM-30K 30kg 0.01kg 1/3000 0.2g
DM-1100 1100g 0.1g 1/11000 2g
DM-11K 11kg 1g 1/11000 20g
Tare Range Full tare range (Subtractive)
Display 5 x 24mm LCD display
Operation
Environment
0
o
~40
o
C (32
o
~104
o
F),
Non-condensed. R.H.¡Ø85%
Power source
in rechargeable battery or power
adaptor
Specifications subject to change without notice
NOTE
To comply with the law of certain countries
and certain approval requirements, the
imperial weight units may be disabled. Contact
your dealer for more information.
To Next Page
Loading...
