23
Body tanning
Operating and display elements
[+] button (2-4/1)
[-] button (2-4/2)
Display (2-4/3)
LED (2-2/4)
The buttons control the intensity of body tanning. Actuate [+] to
increase the intensity of body tanning; actuate [-] to decrease
the intensity. You can select from 3 levels. The 5 LEDs are switched
on appropriately for the3 levels. The previously set level is retained
when restarting tanning. If body tanning was previously switched
off, the unit starts on level 3 (highest level). If tanning is interrupted
and reactivated within 2 minutes, the active LEDs flash for 2
minutes, i.e. high pressure s require up to 2 minutes before they
are again energized. Upon conclusion of the tanning time, the
high pressure lamps are switched off level by level.
Facial tanning
Operating and display elements
[+] button (2-5/1)
[-] button (2-5/2)
Display (2-5/3)
LED (2-5/4)
The buttons control the intensity of facial tanning. Actuate [+] to
increase the intensity of facial tanning; actuate [-] to decrease the
intensity. You can select from 3 levels. The 5 LEDs are switched on
appropriately for the 3 levels. If you would like to completely switch
off facial tanning, actuate the [-] button for 3 seconds while on
level 1. The previously set level is retained when restarting tanning.
If facial tanning was previously switched off, the unit starts on level
3 (highest level). If tanning is interrupted and reactivated within 2
minutes, the active LEDs flash for 2 minutes, i.e. high pressure lamps
require up to 2 minutes before they are again energized. Upon
conclusion of the tanning time, the high pressure lamps are
switched off level by level.
To Next Page
Loading...
