EasyManua.ls Logo

V-Tec DT601 - Precaustions; Specifications

V-Tec DT601
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
-14-
9. Precaustions
10. Specications
Please clean the unit with soft cotton cloth, don't use the organic impregnant or chemical clean agent. If
necessary, please use a little pure water or dilute soap water to clean the dust.
The unit is weather resistant. However do not spray high pressure water on access control keypad
directly. Excessive moisture may cause problems with the unit.
You must use the right adaptor which is supplied by the manufacture or approved by the manufacture..
Payattentiontothehighvoltageinsidetheproducts,pleasereferserviceonlytoatrainedandqualied
professional.
Power Supply : DC 24V ;
Power Consumption: Standby 40mA; Working status 160mA;
Camera: Color CMOS, 2.0 Mega pixel
1/2.7’’sheyecamera,170
0
wide angle;
Unlocking time: 1~99s
Lock Power supply: 12Vdc, 280mA(Internal Power);
Number of relay circuits: 2(the second lock need external device to support)
Mounting: Surface mounting(DT601/ID/FE)
Flush mounting (DT601F/ID/FE)
Working temperature: -15ºC ~ +55ºC
Dimension: 182(H)×93(W)×44(D)mm(DT601/ID/FE)
220(H)×120(W)×50(D)mm(DT601F/ID/FE)

Related product manuals