V-TEK DigiOpen 2Easy DMR18S - UI Update via SD Card

2 EASY
5. Insert the SD card to slot, the information of “Download...” will be
showed when the updated is in progress. After 3 seconds, a long
sound “BP+” will be heard to start the updated.
6. When update is nished, it will return to Standby Mode interface.
UI UPDATE
When door station
is in standby, press
'#8002'+code 66666666
to enter
Setup
page.
select item 2 to enter
Tone Select
setting
page.
* Cancel # Save
2. Tone Select [01]
00 Mute
01 Tune
Press No.
to select
*Back
Setup
1. Language [0]
2. Tone Select [01]
3. Tone Volume [3]
4. Unlock Code [1111]
5. Work Mode [0]
6. Clock ...
7. Setup Code ...
8. About ...
9. Default ...
02 English
3. Copy the Ring.bin le to SD card by computer.
4. Select 2 (Voice update) to enter Tone update,the information of
“update ready” will be showed.
• If other languages are needed for you, please record the audio le
which language you want.
• Then provide the audio le to our company, a Ring.bin le will be
created for you to update the tone.
CONFIGURATION
System Update
DMR18S Technical Manual -11-
7. Check the Tone
Select 02(English) to
check your tone update,
and press # to save.
1. Format SD card
2. Edit UI le
Multi languages are supported on DMR18S, English is the standard
language, if other languages are needed for you, please provide the
translation to us. About the UI le, see the following picture shows: