V2 FLEXY2 User Manual

ENGLISH
- 9 -
IMPORTANT REMARKS
For any installation problem please contact our Customer Service
atthenumber+39-0172.812411operatingMondaytoFriday
from8:30to12:30andfrom14:00to18:00.
V2 has the right to modify the product without previous
notice; it also declines any responsibility to damage or
injury to people or things caused by improper use or wrong
installation.
m Please read this instruction manual very carefully
before installing and programming your control unit.
• Thisinstructionmanualisonlyforqualiedtechnicians,who
specialize in installations and automations.
• Thecontentsofthisinstructionmanualdonotconcerntheend
user.
• Everyprogrammingand/oreverymaintenanceserviceshould
be done only by qualied technicians.
AUTOMATION MUST BE IMPLEMENTED IN COMPLIANCE
WITH THE EUROPEAN REGULATIONS IN FORCE:
EN 60204-1 (Machinerysafety.electricalequipment
     ofmachines,part1:generalrules)
EN 12445  (Safeuseofautomatedlockingdevices,test
     methods)
EN 12453  (Safeuseofautomatedlockingdevices,
     requirements)
• Theinstallermustprovideforadevice(es.magnetotermical
switch)ensuringtheomnipolarsectioningoftheequipment
fromthepowersupply.Thestandardsrequireaseparationof
thecontactsofatleast3mmineachpole(EN60335-1).
• Aftermakingconnectionsontheterminalboard,useone
hoseclamptoxdangerousvoltagewiresneartheterminal
boardandanotherhoseclamptoxsafetylowvoltagewires
usedforaccessoriesconnection;thisway,incaseofaccidental
detachmentofaconductingwire,dangerousvoltagepartswill
notcomeintocontactwithsafetylowvoltageones.
• TheplasticcasehasanIP55insulation;toconnectexibleor
rigidpipes,usepipettingshavingthesameinsulationlevel.
• Installationrequiresmechanicalandelectricalskills,thereforeit
shallbecarriedoutbyqualiedpersonnelonly,whocanissue
theComplianceCerticateconcerningthewholeinstallation
(EECMachineDirective2006/42/CEE,AnnexIIA).
• Theautomatedvehiculargatesshallcomplywiththefollowing
rules:EN13241-1,EN12453,EN12445aswellasanylocal
ruleinforce.
• Alsotheautomationupstreamelectricsystemshallcomplywith
thelawsandrulesinforceandbecarriedoutworkmanlike.
• Thedoorthrustforceadjustmentshallbemeasuredbymeans
ofapropertoolandadjustedaccordingtothemax.limits,
whichEN12453allows.
• Connecttheearthingleadofthemotorstotheelectricitygrid
earth system.
• Observeallnecessaryprecautions(e.g.anti-staticbracelet)for
handlingpartssensitivetoelectrostaticdischarges.
DECLARATION OF CONFORMITY
V2S.p.A.herebydeclarethatFLEXY2productsconformtothe
essentialrequirementsestablishedinthefollowingdirectives:
• 2004/108/CEE(EMCDirectiveinaccordancewithstandards
EN61000-6-2,EN61000-6-3+EN50336)
• 2006/95/CEE(LowVoltageDirectiveinaccordancewith
standardsEN60335-1+EN60335-2-103)
• 99/05/CEE(RadioDirectiveinaccordancewithstandard
EN301489-3)
• DirectiveROHS22011/65/CE
Racconigi,12/01/2013
V2S.p.A.legalrepresentative.egaledellaV2S.p.A.
Cosimo De Falco
TECHNICAL SPECIFICATIONS
Powersupply 230V/50Hz 120V/60Hz
Maxmotorsload 700W 700W
Maxaccessoriesload24V 3W 3W
Workingtemperature -20 ÷ +60 °C -20 ÷ +60 °C
Protectionfuse F1 = 5A delayed F1 = 8A delayed
Dimensions 170 x 185 x 70 mm
Weight 800g
Protection IP55

V2 FLEXY2 Specifications

General

Brand	V2
Model	FLEXY2
Category	Control Unit
Language	English