Vacon 100X - Installation Procedure; Installation of Wall-Mounted Drives in a Marine Environment

4.4 INSTALLATION PROCEDURE
4.4.1 INSTALLATION OF WALL-MOUNTED DRIVES IN A MARINE ENVIRONMENT
INSTALLATION PROCEDURE, MR4-MR9
1 MR4-MR7: Attach the components of the marine
option. Use 4 pcs of Ø 8 mm / 0.31 in screws.
•
Tighten the screw so that it is tight, but so that
the bracket (A) does not deform. For the other
2 screws (B), use a tightening torque of 12 Nm.
A
A
B
B
A. The bracket
B. The screw tightened to 12 Nm
VACON · 24 MOUNTING
4
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205