Vacon 20 - Page 23

22 • vacon monitoring & parameters
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
5
V2.11 Analogue input E1 % 61
Analogue input signal 1 in % from
option board, hidden until an
option board is connected
V2.12 Analogue output E1 % 31
Analogue output signal 1 in % from
option board, hidden until an
option board is connected
V2.13 Analogue output E2 % 32
Analogue output signal 2 in % from
option board, hidden until an
option board is connected
V2.14 DIE1, DIE2, DIE3 33
This monitor value shows status of
the digital inputs 1-3 from option
board, hidden until an option board
is connected
V2.15 DIE4, DIE5, DIE6 34
This monitor value shows status of
the digital inputs 4-6 from option
board, hidden until an option board
is connected
V2.16 DOE1,DOE2,DOE3 35
This monitor value shows status of
the relay outputs 1-3 from option
board, hidden until an option board
is connected
V2.17 DOE4,DOE5,DOE6 36
This monitor value shows status of
the relay outputs 4-6 from option
board, hidden until an option board
is connected
V2.18 Temperature input 1 50
Measured value of Temperature
input 1 in temperature unit ( Cel-
sius or Kelvin) by parameter set-
ting, hidden until an option board
is connected
V2.19 Temperature input 2 51
Measured value of Temperature
input 2 in temperature unit ( Cel-
sius or Kelvin) by parameter set-
ting, hidden until an option board
is connected
V2.20 Temperature input 3 52
Measured value of Temperature
input 3 in temperature unit ( Cel-
sius or Kelvin) by parameter set-
ting, hidden until an option board
is connected
Code Monitoring signal Unit ID Description
Table 4: Monitoring values