VADDIO EasyTalk - Technical Specifications: EasyTalk USB Mixer;Amp; Mixer;Amp Audio and Interface Specs

EasyTalk USB Tools
Vaddio EasyTalk USB Solution - Document Number 342-0449 Rev A Page 42 of 48
Technical Specifications
EasyTalk USB Mixer/Amp
Part Numbers
EasyUSB Mixer/Amp 999-8530-000 (North America)
EasyUSB Mixer/Amp 999-8530-001 (International)
Audio Specifications
Frequency Response: 20 HZ to 20 kHz
Dynamic Range: >90dB
THD + Noise: <.02%
Analog Line Input
Connector: RCA (Unbalanced),
Impedance: 10Kohm (Unbalanced),
Nominal Level: -10dBu (Unbalanced)
Analog Line Output
Connector: RCA (Unbalanced)
Impedance: 10Kohm (Unbalanced)
Nominal Level: -10dBu (Unbalanced)
Amplifier
Connector: Two 2-Pin Molex Eurostyle 5.0mm Terminal connectors
Impendence: 8 ohm
Amplifier Output: 2X20 Watts
THD + Noise: <.2% at 1/3 power
USB Audio Interface
Connector: Type-B Female
Type: USB 2.0 Compliant
PC Audio Controls: Mute & Volume
PC HID Controls: On/Off Hook (application dependent)
EasyMic Ports
Connector: Two (2) RJ-45
Interface: Proprietary
Max Distance: 100 feet to MicPOD
Dip Switch Settings
8-Position Dip Switch, Audio Processing - Mixing Modes, Compressor, Filter, Delay,
and Updates
User Indicators
Communications Status, Mute, Power
Power Supply
5.5mm OD x 2.5mm ID Coax Connector
Supply: 18 VDC, 2.75 Amp, Auto-switching
Serial Control
Protocol
RS-232 (external control), 38.4K baud