5 Set-up
20 Set-up instructions 0020200969_07
9. Slide the flue pipe with the new terminal into the air pipe
until you hear the terminal click into place.
Condition: Terminal secured using screws
▶ Attach the terminal using the side screws.
5.4.3 Deflector set (not for 0010035512)
5.4.3.1 Scope of delivery
1 Wall collar
2 Opening piece
3 Deflector
– Deflector set, DN 60, PP, black (article number
0020219533)
– Deflector set, DN 60, PP, white (article number
0020219534)
5.4.3.2 Installing the deflector set
Condition: Replacing the deflector set (change of colour)
▶ In the event of a change of colour, replace the deflector
set, including the wall collar (→ Page 19).
▶ Install the deflector, instead of the end pipe, on the
opening piece.
Condition: Replacing the end pipe only
▶ Release the catch between the opening piece and the
end pipe.
▶ Pull the end pipe from the opening piece.
▶ Slide the deflector onto the opening piece until you hear
the deflector click into place.
5.4.3.3 Adjusting the deflector
▶ Set the terminal to the required position.
– The flue gas stream is directed upwards at an angle
of approx. 45° when the deflector is set in the centre
position.
– If necessary, the deflector terminal can be rotated 45°
anti-clockwise or clockwise. These setting options
mean that the flue system can be further optimised.
To Next Page
Loading...
