Notes on the documentation 2
0020209591_01 ecoTEC plus Installation and maintenance instructions 9
2 Notes on the documentation
2.1 Observing other applicable documents
▶ You must observe all the operating and installation in-
structions included with the system components.
2.2 Storing documents
▶ Pass these instructions and all other applicable docu-
ments on to the system operator.
2.3 Applicability of the instructions
These instructions apply only to:
Product article number
Article num-
ber
Gas Council
Number
612 (VU GB 126/5‑5 A)
ecoTEC plus
0010018531 41-044-78
615 (VU GB 156/5‑5 A)
ecoTEC plus
0010018532 41-044-79
618 (VU GB 186/5‑5 A)
ecoTEC plus
0010018533 41-044-80
618 (VU GB 186/5‑5 A
LPG) ecoTEC plus
0010018534 41-044-81
624 (VU GB 246/5‑5 A)
ecoTEC plus
0010018535 41-044-82
630 (VU GB 306/5‑5 A)
ecoTEC plus
0010018536 41-044-83
630 (VU GB 306/5‑5 A
LPG) ecoTEC plus
0010018537 41-044-84
637 (VU GB 376/5‑5 A)
ecoTEC plus
0010018538 41-044-85
825 (VUW GB 256/5‑5)
ecoTEC plus
0010018353 47-044-57
832 (VUW GB 326/5‑5)
ecoTEC plus
0010018354 47-044-58
832 (VUW GB 326/5‑5
LPG) ecoTEC plus
0010018355 47-044-59
835 (VUW GB 356/5‑5)
ecoTEC plus
0010016540 47-044-53
838 (VUW GB 386/5‑5)
ecoTEC plus
0010018356 47-044-60
2.4 Benchmark
Vaillant is a licensed member of the Benchmark Scheme
which aims to improve the standards of installation and com-
missioning of domestic heating and hot water systems in the
UK and to encourage regular servicing to optimise safety, ef-
ficiency and performance.
Benchmark is managed and promoted by the Heating and
Hotwater Industry Council.
For more information visit www.centralheating.co.uk
2.5 Local regulations
Benchmark places responsibilities on both manufacturers
and installers. The purpose is to ensure that customers are
provided with the correct equipment for their needs, that it is
installed, commissioned and serviced in accordance with the
manufacturer’s instructions by a competent person approved
at the time by the Health and Safety Executive and that it
meets the requirements of the appropriate Building Regu-
lations. The Benchmark Checklist can be used to demon-
strate compliance with Building Regulations and should be
provided to the customer for future reference.
Installers are required to carry out installation, commission-
ing and servicing work in accordance with the Benchmark
Code of Practice which is available from the Heating and
Hotwater Industry Council who manage and promote the
Scheme.
To Next Page
Loading...
Need help?
General
