*****INTERNAL*****30 R_D proof- 26.10.2022 / 09:15:46- VaillantGroup\DOC-agt\Brand\VIH_QW_190_6\ENG\OI-II_GB_0020291525
14 Operating instructions 0020291525_04
Setting level Values Unit Increment, select Factory setting Setting
Min. Max.
Building circuit flow rate Current value l/h
Compressor anti-cycling time Current value min
Immersion heater anti-cycling
time
Current value min
Target flow temp. Current value ℃
Current flow temp. Current value ℃
Energy integral Current value °min
Cooling capacity Current value kW
Electrical power consumption Current value kW Total power consump-
tion of the heat pump
without any external
components connec-
ted (as supplied).
Compressor modulation Current value %
Air inlet temperature Current value ℃
Immersion heater power Current value kW
External current anode status Current value Anode not con-
nected
Outdoor temperature Current value ℃
Information →
Contact details Phone number
Serial number Permanent value
Operating hours total Cumulative value h
Hours heating Cumulative value h
DHW operating hours Cumulative value h
Cooling op. hours Cumulative value h
Default settings →
Language Current language Languages available for
selection
02 English
Display contrast Current value 1 25
15 40
Resets →
No sub-items available
*If no system control is installed, the menu item is displayed in the product's control panel.
To Next Page
Loading...
Need help?
General