Need help?Do you have a question about the Vaisala HUMICAP HMW92 and is the answer not in the manual?
General| Measurement Range (Humidity) | 0...100 %RH |
|---|---|
| Protection Class | IP65 |
| Accuracy (Temperature) | ±0.2 °C |
| Output Signal | 4 to 20 mA or RS-485 |
| Sensor | HUMICAP® 180R |
| Accuracy (Humidity) | ±1% RH (0...90% RH), ±1.7% RH (90...100% RH) |
Covers essential safety warnings, ESD protection, and recycling.
Details key differences between HMW90 series transmitter models.
Explains DIP switch and software configuration methods for analog and digital models.
Guides on selecting location and mounting the base securely.
Provides wiring diagrams for various HMW/TMW models and RS-485 connections.
Covers connecting to the service port via MI70 indicator or computer.
Lists and explains serial commands for transmitter information, settings, and measurements.
Details how to set analog output modes, scaling, and clipping/error limits.
Explains custom relay modes, parameters, limits, and provides examples.
Guides on adjusting humidity and temperature measurements via serial commands.
Covers cleaning and various methods for calibration/adjustment.
Details methods for reverting the transmitter to factory settings using DIP switches or service port.
Describes BACnet objects like Device, Humidity, Temperature, Pressure, and Altitude.
To Next Page
