Need help?Do you have a question about the Vaisala SPS311 and is the answer not in the manual?
General| Device Type | Particulate Matter Sensor |
|---|---|
| PM Measurement Range | 0 to 1000 µg/m³ |
| Technology | Optical |
| Measurement Range (RH) | 0 to 100 %RH |
| Measurement Range (Temperature) | -20...+60°C |
| Operating Temperature | -20...+60°C |
| Operating Humidity | 0 to 100 %RH |
| Output | Digital |
Highlights important safety considerations and their meaning (WARNING, CAUTION, NOTE).
Lists specific safety precautions for the SPS311 product.
Explains the risks of Electrostatic Discharge and how to prevent it.
Describes the general layout of the front panel, including controls and indicators.
Explains the function and location of the power control switch.
Describes the system status indicated by the Standby and Power/Status LEDs.
Guides on configuring network settings using the RegConfig program.
Details how to create a connection to the unit using NetMeeting.
Provides steps to create a shortcut and configure NetMeeting for use.
Step-by-step guide to establish a NetMeeting connection to the plug-in unit.
Details the process for setting up a connection via Remote Desktop Connection.
Explains how to set up a connection using VNC.
Guides on connecting using HyperTerminal or PuTTYtel.
Describes the RegConfig program for setting communication parameters.
Instructions for updating the unit software for MRP111.
Steps to verify if the MRP111 software update was successful.
Instructions for updating the unit software for MPU121/MPU112/MPU111.
Steps to verify if the MPU software update was successful.
Instructions for removing and installing plug-in units.
Guidelines for creating a problem report for troubleshooting.
Contact information for Vaisala technical support.
To Next Page
