Chapter 3 _____________________________________________________________Installation
VAISALA
_______________________________________________________________________ 27
To create a connection with NetMeeting to the plug-in unit:
1. Power up the sounding processing subsystem.
2. Start the NetMeeting program on the workstation by selecting
Start - Programs - Accessories - Communications -
NetMeeting.
3. Verify that NetMeeting is configured correctly. See section
Configuring NetMeeting on page 26.
4. Create a connection to MRP111 or MPU or MWI210 unit by
selecting Call - New Call.
5. Enter the unit's default IP address in the To box and click Call.
- MRP111: 192.168.0.10
- MPU: 192.168.0.20
- In SPS220, MWI210: 192.168.0.20
6. Log on to the system by entering the following information:
Leave Domain empty by default.
- Username: administrator
- Password: Administrator
- Domain: <empty>
To Next Page
Loading...