Vaisala SPS311 - Page 28

TECHNICAL REFERENCE ________________________________________________________
28
__________________________________________________________________ M210651EN-G
7. Start the RegConfig program on the unit by clicking the Start
button and selecting Run.
0204-047
Figure 7 Starting the RegConfig Program
8. Type regconfig in the Open text box and click OK.
Information on using the RegConfig program can be found in
section RegConfig Program on page 34 .
9. If you make changes with RegConfig, you will be asked if you
want to save the changes. The unit will restart automatically and
the NetMeeting connection ends if you select to save the
changes.
10. If you did not make any changes, end the connection by
selecting Call - Hang Up and then close NetMeeting.