Valeport DataLog x2 - Page 13

DataLog x2 and Terminal x2 Installation and User Guide
MANUAL-1899207337-17
Page | 11
© 2021 – Valeport Ltd
Header is a free text field that will be inserted
into the header of every recorded file.
Sampling modes will depend on the instrument
connected.
The final screen will show a summary of the
commands that will be sent to the instrument.
If settings have not been changed, then no
commands will be shown and the finish button is
greyed out.
Simply type a # into the command window and
the Finish button will be available.